landbrief.

Tourist accommodation zone in Queensland — what you can build

Land for holiday apartments, resorts and short-stay accommodation, usually near beaches or attractions. Permanent residents share the area with visitors, so expect more people, more cars and more noise in peak seasons.

In short: Tourist and short-stay buildings are usually the zone's purpose; a permanent house can be treated differently, so check the table. The table below gives the real answer, council by council.

What the tables of assessment say, council by council

Each council's planning scheme has a table of assessment: for every zone and every kind of project, it says whether you need no application, or a development application and how it is assessed. Each coloured tag links to that council's page for the project. Read from 6 councils.

What the tags mean

  • Accepted — no planning application needed.
  • Accepted if requirements met — no application if your plans meet the council's code requirements; if they do not, it becomes a development application.
  • Code — a development application assessed against the planning codes, without public notification.
  • Impact — a development application with public notification: neighbours can make submissions and object. How to object to a development application.
  • Not allowed — the planning scheme does not allow it in this zone.

“Varies” means the table depends on the details of the project. An overlay such as flood or bushfire can turn an accepted project into a development application — see planning overlays explained.

Common questions

Can I build a granny flat in the tourist accommodation zone?

It varies by council. Across the 6 councils whose tables of assessment we have read, the most common answer for a granny flat in this zone is no development application (it is accepted development). The split was: 2 accepted, 2 accepted if requirements met, 1 code, 1 impact (each council zone counted once). Check your own council's table on this page, and whether an overlay such as flood or bushfire applies to your lot.

Do I need approval for a dual occupancy in the tourist accommodation zone?

It varies by council. Across the 6 councils whose tables of assessment we have read, the most common answer for a dual occupancy in this zone is a development application with public notification (impact assessment). The split was: 1 accepted if requirements met, 2 code, 3 impact (each council zone counted once). Check your own council's table on this page, and whether an overlay such as flood or bushfire applies to your lot.

Can I subdivide land in the tourist accommodation zone?

It varies by council. Across the 6 councils whose tables of assessment we have read, the most common answer for subdividing in this zone is a development application assessed against the codes (code assessment). The split was: 4 code, 2 impact (each council zone counted once). Check your own council's table on this page, and whether an overlay such as flood or bushfire applies to your lot.

Is your lot in this zone?

A Landbrief site report checks any Queensland address against its zone and every planning layer that applies — $49 as a PDF. Check an address.

Other residential zones

Low density residentialLow-medium density residentialMedium density residentialHigh density residentialCharacter residentialGeneral residentialTownship

Read from each council's planning scheme tables of assessment. General information, not advice. The council's planning scheme and the Planning Act 2016 decide — confirm with the council or a town planner before you build.