What can you build in Blackall Tambo?
Check any Blackall Tambo property against the planning layers that control it under the Blackall-Tambo Region Planning Scheme 2020 (Commenced 24 January 2020) — and get the full picture as a planner-grade PDF report in minutes.
Checking the planning layers for this site — this takes 10–20 seconds…
The Blackall Tambo council area
The outline is the Blackall-Tambo Regional Council area this page covers — if your property sits inside it, every report check on this page applies.
Boundary © State of Queensland (CC BY 4.0).
Blackall Tambo scheme overlays we check
- · Queensland floodplain assessment overlay
- · Blackall 1% Annual Exceedance Probability design flood event (8.0m @ BoM gauge 036155)
- · Tambo 1% Annual Exceedance Probability design flood event (5.27m @ BoM gauge 035284)
Queensland-wide checks (every address)
- · Flood study areas
- · Vegetation management (regulated vegetation)
- · Protected plants / flora survey triggers
- · Priority agricultural areas
- · Strategic environmental areas
- · Priority living areas
- · Coastal management districts
- · Coastal hazard areas
- · Wetlands
- · Acid sulfate soils
- · Water resource plan areas
- · State-controlled roads
Development application alerts, free
Watch Blackall Tambo for development applications
Get a brief whenever a development application — a DA, the plans lodged with council before building starts — is lodged or decided near you, with the zone and planning constraints for the site. Rolling out council by council.
Reports are automated information summaries drawn from Queensland Government and Blackall-Tambo Regional Council spatial services. They are not planning advice; data coverage is disclosed on every report.